ANSA Doors "H15" 130mm Steel Roller Shutter

Maximum Size - 17000 mm wide x 17000 mm high

Applications

The H15 steel roller shutter is an extremely robust access door, for building perimeter security or storage applications. It is typically used in warehouses, factories, distribution and transport facilities, remote buildings and for security applications.

Features

1. Curtain - Constructed using 130 x 1.0 mm / 130 x 1.2mm or 130 x 1.6mm interlocking slats in galvanised steel roll formed in house at Ansa doors. Slat thickness is dependent on opening width and wind load application. The slats are retained in position using nylon end clips, fitted with galvanised steel rivets. For more information, refer to technical information detail below.
2. Bottom Rail - Rigid steel angle or box section RHS. For more information, refer to technical information detail below.
3. Side Guides (Track) - Side guides are fabricated from galvanised steel channel and heavy duty RHS fabricated in house at Ansa doors, and completed with splayed tops. Side guides configuration is dependent on opening width and application. For more information, refer to technical information detail below.
4. Roller Drum - Fabricated from mild steel or galvanised tube with the outside diameter and thickness appropriate to the size and application of the steel roller shutter.
5. Bracket Plates - Fabricated from appropriate mild steel in sizes to suit the height and width of the opening and engineered tube size.
6. Operation - Electrically operated steel roller shutter.
7. Door Locking - Locking is not recommended for electrically operated steel roller shutters.
8. Finishes - Galvanised steel items are left in their raw form. Powder coating (in standard available colours) is an optional extra, and is applied using our in house powder coat line. (Note powder coating is restricted to certain size doors only)
9. Vision / Ventilation - As an optional extra, slats can be provided with slots to provide ventilation or vision through the curtain. For more information, refer to technical information detail below.
10. Hoods / Fascias - Available as optional extras to suit the application. Hoods are manufactured in house at Ansa Doors, from 0.5 mm galvanised steel sheet. Fascias are fabricated using 75 x 35 x 2.0 mm galvanised steel channel for the perimeter frame and interlocking galvanised steel roll formed slats as an infill panel.
11. Weight-
    

    14.797 kg/m² (1.0mm thick slat)

    17.760 kg/m² (1.2mm thick slat)

    23.689 kg/m² (1.6mm thick slat)

Technical Information

H15 - BOTTOM RAIL PROFILE.pdf
H15 - GUIDE PROFILE.pdf
H15 - HEADROOM & SIDEROOM DETAIL.pdf
H15 - SLAT PROFILE.pdf
H13 - SLAT PROFILE.pdf
FIRE ESCAPE WICKET GATE DETAIL.pdf
TRADITIONAL WICKET GATE DETAIL.pdf